C. remove the duplex motor, Reverse roller section (rspf model only), A. remove the reverse unit – Sharp AL-1651CS Benutzerhandbuch
Seite 55: B. remove the reverse roller, C. remove the duplex motor -16, Reverse roller section (rspf model only) -16
Advertising
AL-1651CS DISASSEMBLY AND ASSEMBLY 8 - 16
3) Disconnect the connector.
4) Remove the two screws, and remove the NIC PWB unit.
5) Disconnect the connectors.
6) Remove the five screws, and remove the MCU PWB.
C. Remove the Duplex motor.
1) Remove two screws.
2) Remove the Duplex motor cover.
3) Remove the Duplex motor.
Note: When reassembling, be sure to engage the Duplex motor gear
with the belt on the main body side.
10. Reverse roller section (RSPF model
only)
A. Remove the reverse unit.
1) Remove four screws
2) Remove the spring, and the earth wire
3) Remove the reverse unit.
B. Remove the reverse roller.
1) Bend the reverse roller and remove it.
2)
2)
3)
3)
1)
1)
1)
1)
2)
2)
3)
2)
2)
2)
1
2
3
1
1
2
3
1
Advertising