Sony RM-VL900T - Handbuch (Seite 13)

13 GB
To control the volume
Press 2 +/– to control the
volume, and % to mute. When
you select a visual component, the
TV’s volume will be controlled
(the TV button lights up), and
when you select an audio
component, the amplifier’s
volume will be controlled (the
AMP button lights up). You can
change this setting also (page 21).
Notes
• If you have programmed any signal
on the 2 +/– or % button of any
component by the Learning function
(page 15), that signal will be
transmitted instead of controlling the
volume of the TV or amplifier when
you select that component.
• If you have programmed any signal
on the 2 +/– or % button of TV or
AMP by the Learning function, that
signal will be transmitted only when
you select TV or AMP. When you
select other components, the preset
volume control signals for TV or
AMP will be transmitted.
• If you have assigned another
component to the TV or AMP button
(page 32), the volume of the TV or
amplifier cannot be controlled even
when you select other components.
Continued
2
Press any Player Control
button.
See “Table of Preset Functions”
(page 48) for the functions of
buttons for each component.
Note
The remote control signals may be
different for some components or
functions. In this case, programme the
remote control signals with the
Learning function (page 15). Note,
however, that components and
functions that do not support the
remote control of infrared signals will
not work with this Commander.