Sony RM-VL900T - Handbuch (Seite 30)

30 GB
For the Component Select
buttons
1
Press S (set).
All Component Select buttons
flash.
2
While holding one of the
Component Select buttons
whose interval you want to
change pressed, press one
of the Number buttons (1 –
4) to select the interval.
The Component Select button
lights up when you press these
buttons, and turns off when
you release them.
Note
If you press a Number button apart
from 1 – 4, the S (set) indicator
flashes twice, and the Commander
returns to its state in Step 1. Be sure
to select from 1 – 4.
Executing a Series of Commands
— System Control Function
(continued)
Adding an Extra
Function to the
Component Select
Buttons
Programming the Power-On
Command of the Selected
Component (for Sony
Components only)
When using Sony components,
you can program the Power-On
signal for each component on a
Component Select button. You can
select the desired component and
power it on by just pressing that
Component Select button.
Example: To program the TV
button
1
Press S (set).
All Component Select buttons
flash.