Sony RM-VL900T - Handbuch (Seite 33)

33 GB
In this example, press the
Number 5 button to select CD.
1: VCR 7: MD
2: VD 8: TV
3: SAT 9: CBL
4: AMP 0: DVD
5: CD
6: TAPE
Note
Only the function to this step is
assigned. Other “learned” functions
are not assigned.
4
•If you need to set the
component code, follow
the steps on pages 8 or 11.
•If you need to program
some signals by the
Learning function, follow
the Steps 1 and 3 to 7 on
pages 15 to 17.
Continued
To reset a Component Select
button to its original setting
1
Press and hold S (set) for
over 3 seconds.
The S (set) indicator lights up,
and all Component Select
buttons flash.
2
While holding x pressed,
press the desired
Component Select button.
The S (set) indicator turns off,
and the selected Component
button lights up.
Note
Through this operation, you can
only erase the “learned” functions
to all buttons on a specific
component. The “learned”
functions to the Component Select
buttons cannot be changed here.
You must be sure beforehand, of
which “learned” function you want
to erase.
3
Press S (set) to finish
setting.