Sony RM-VL900T - Handbuch (Seite 38)

38 GB
Transferring Data
between Remote
Commanders
You can transfer the data, such as
“learned” signals and component
code settings, between this
Commander and another Sony
RM-VL900T or a Sony
RM-AV2100T remote commander.
If you want to exchange data
with a Sony RM-AV2100T
Refer to “Data Transfer”
instructions in the RM-AV2100T
manual for the necessary
procedures.
Note on remote commanders
Data can be transferred between this
commander and another Sony
RM-VL900T or RM-AV2100T remote
commander. You cannot transfer data
between this commander and the
commander other than Sony
RM-VL900T and RM-AV2100T.
Transferring the data
You can transfer all data of this
Commander or the data of a
Component Select button on this
Commander to another Sony
RM-VL900T or RM-AV2100T.
To transfer all data of the
Commander
1
Place the RM-VL900T head
to head with another
remote commander.
Another remote
commander
RM-VL900T
about 5 – 10 cm
(2 – 4 inches) away
2
Press and hold S (set) for
more than 3 seconds.
The S (set) indicator lights up,
and all Component Select
buttons flash.
3
While holding cursor v
pressed, press the Number
1 button.
The S (set) indicator flashes
and all Component Select
buttons light up.