Sony RM-VL900T Benutzerhandbuch

Seite 9

Advertising
background image

9

GB

3

Press the Component Select
button for the desired
component.

The selected Component
button lights up, and all other
buttons turn off.

4

Press the Number buttons
to enter the three-digit
component code number.

The selected Component
button turns off each time you
press a Number button.

5

Press ENT.

The Component button turns
off.

If the Component button
flashes five times before
turning off, it means that the
setup is incomplete. Start over
from Step 2.

Continued

Notes

• If you press a component code

number that is not on the table in the
supplied “Component Code
Numbers”, or if you press a button in
an improper order, the Component
button flashes five times, and then
turns off. Check the component code
number, and try setting again.

• If you don’t input anything into the

Commander for over 20 seconds
between each step, the setup
procedure will be canceled. To set the
code, start over from Step 2.

• If you press S (set) while setting the

component code, all code numbers
will be lost, and the setup procedure
will be canceled. Start over from Step
2.

To cancel setup, press S (set).

Advertising