Document Outline

• Front cover
• Standard for the Safety
• Safety Precautions
• Caution
• Contents
• 1. Overview
  • 1-1. Introduction
  • 1-2. Major Features
• 2. Data Format and Basic Operations
  • 2-1. Data Format
  • 2-2. TOC
  • 2-3. Initialization of Recording Media (Formatting)
  • 2-4. Removing Recording Media
  • 2-5. Overwriting Data
  • 2-6. ID Block
• 3. Names and Functions of Parts
  • 3-1. SIR-3400H (Recording unit)
    • 3-1-1. Front Panel
    • 3-1-2. Rear Panel
    • 3-1-3. Side Panels
  • 3-2. SIR-3032i/W (Measuring Unit)
    • 3-2-1. Front Panel
    • 3-2-2. Rear Panel
    • 3-2-3. Side Panels
• 4. Preparations
  • 4-1. Connecting the Power Supply
    • 4-1-1. AC Power Supply
    • 4-1-2. DC Power Supply
    • 4-1-3. Internal Backup Battery
  • 4-2. Connecting the Signals
  • 4-3. Cartridges
    • 4-3-1. Cartridges
    • 4-3-2. Loading a Cartridge
    • 4-3-3. Ejecting the Cartridge
  • 4-4. Diagnostics
  • 4-5. Calibration
  • 4-6. Required Settings Before Recording
  • 4-7. Source and Record
    • 4-7-1. Source
    • 4-7-2. Record
• 5. Description of Transport Mode
  • 5-1. Transport Modes
  • 5-2. Operation Transition Diagram
  • 5-3. Transport Mode Transition Table
• 6. Setting and Check Items
  • 6-1. Default Settings
    • 6-1-1. Recording Unit Setting/Checking (Including Media Settings)
    • 6-1-2. Measuring Unit Setting/Checking (Including Input/Output Settings)
  • 6-2. LCD Screen Configuration
• 7. Basic Settings (Main Screen)
  • 7-1. Setting Procedure (for Main Screen)
  • 7-2. Settings
    • 7-2-1. Fan Control On/Off (Fan Control)
    • 7-2-2. Condensation Sensor On/Off (Dew Sense)
    • 7-2-3. Synchronized Master/Subordinate Operation (Sync-Mode)
• 8. Function Setup (Function Screen)
  • 8-1. Setting Procedure (for Function Screen)
  • 8-2. Settings
    • 8-2-1. Selecting the Frequency Type (Freq-Type)
    • 8-2-2. Recording Media Auto Repeat On/Off (Auto-Repeat)
    • 8-2-3. Recording Media Overwrite On/Off (Overwrite)
    • 8-2-4. Selecting the Trigger Mode (Trigger Mode)
    • 8-2-5. Pre-Trigger Recording On/Off (Pre-Trigger)
    • 8-2-6. IRIG-B Timecode On/Off (IRIG)
• 9. Display Settings (Display Screen)
  • 9-1. Setting Procedure (for Display Screen)
  • 9-2. Settings
    • 9-2-1. Switching the Response Characteristics (Bar meter Peak)
    • 9-2-2. Switching the Bar Meter Scale (Bar meter Scale)
    • 9-2-3. Adjusting LCD Contrast (LCD Contrast)
    • 9-2-4. Adjusting LCD Brightness (LCD Brightness)
• 10. Network Settings (Network Screen)
  • 10-1. Setting Procedure
• 11. Clock Setting (Clock Screen)
  • 11-1. Setting Procedure
• 12. Operation Settings (Using Setting Key)
  • 12-1. ID Number Increments
  • 12-2. Index Number Increments
  • 12-3. Setting the Recording/Playback Speed
  • 12-4. Setting the Number of Recording Channels
  • 12-5. Setting the Input Range
    • 12-5-1. Setting the Manual Range
    • 12-5-2. Setting the Auto Range
  • 12-6. Setting the Input DC Offset
    • 12-6-1. Setting Input DC Offset Manually
    • 12-6-2. Setting Input DC Offset Automatically
  • 12-7. Setting the Input Format
  • 12-8. Setting the Transmission Format
  • 12-9. Recording Memo
  • 12-10. Setting the Output Level
  • 12-11. Setting the Test Signal
  • 12-12. Mark Settings
  • 12-13. Panel Lock
• 13. Other Settings
  • 13-1. Changing to the Address, Amount of Recording Media Remaining, or Time Display
  • 13-2. Clearing the Peak Indicator and Over Indicator
  • 13-3. Switching the Speaker or Earphone Playback Signal Source
  • 13-4. Adjusting the Playback Volume
  • 13-5. Changing the AC Voltage
• 14. Execution of Function/Checking
  • 14-1. Save of Setting Values/Recall of Setting Values (Save/Recall Setup)
  • 14-2. Copying Mark1/Mark2 (Copy)
  • 14-3. Formatting the Hard Disk Drive (Format)
  • 14-4. Repairing Recording Media Discrepancies (RAID Rebuild)
  • 14-5. Executing Calibration (Calibration)
  • 14-6. Bar Meter Auto Adjustment (Barmeter Auto Adjustment)
  • 14-7. Executing Diagnostics (Diagnostics)
  • 14-8. Checking the Recording Media Contents (TOC Viewer)
    • 14-8-1. Viewing the TOC List
    • 14-8-2. Detailed INDEX List including IDs
    • 14-8-3. TOC Screen Elements
• 15. Data Recording/Playback
  • 15-1. Data Recording
  • 15-2. Data Playback
  • 15-3. Recording and Playback Voice Annotations
    • 15-3-1. Connecting the Microphone and Earphone
    • 15-3-2. Recording Voice Annotations
    • 15-3-3. Playback Voice Annotations
  • 15-4. Recording and Playback AUX Digital Data
    • 15-4-1. Connecting the AUX Digital Data
    • 15-4-2. Recording AUX Digital Data Signals
    • 15-4-3. Playback AUX Digital Data Signals
  • 15-5. Recording and Playback AUX Analog Data
    • 15-5-1. Recording and Playback IRIG-B Time Code Signal
    • 15-5-2. Recording and Playback AUX Analog Data
  • 15-6. Trigger Recording
    • 15-6-1. Connecting the Trigger Signal
    • 15-6-2. Trigger Recording
    • 15-6-3. Playback of the Pre-trigger Data
• 16. Search
  • 16-1. ID/INDEX Number Search
    • 16-1-1. Searching with the SEARCH key
    • 16-1-2. Searching with the TOC Viewer
  • 16-2. Start ID Search
    • 16-2-1. Searching at the Next Recording Start Position
    • 16-2-2. Searching at the Current Recording Start Position
  • 16-3. Mark Search
  • 16-4. Address Search
  • 16-5. Real-time Clock Search
  • 16-6. Manual Search
• 17. Control by Telnet
  • 17-1. Command Overview
  • 17-2. Command Details
• 18. Errors and Error Messages
  • 18-1. Warning Messages
  • 18-2. Error Code
  • 18-3. Remedies for Operation Errors
    • 18-3-1. When Power does not Turn On when Standby Switch is Held Down for Two Seconds, or Key Operation is Disabled
• 19. Connecting the Recording Unit and Measuring Unit
  • 19-1. Attaching the Recording Unit and Measuring Unit
  • 19-2. Cable Connections
• 20. Installing the Shock Mount Adaptor
  • 20-1. Before Usage
  • 20-2. Installation Procedure for Shock Mount Adaptor
• 21. Attaching the Rack Mount Adaptor
  • 21-1. Before Use
  • 21-2. Attachment Procedure for Rack Mount Adaptor
• 22. Specifications
  • 22-1. Specifications (SIR-3400H)
    • 22-1-1. Cartridges
    • 22-1-2. Voice Annotation Channel
    • 22-1-3. Monitor Out
    • 22-1-4. AUX Digital Channel (AUX-1)
    • 22-1-5. AUX Analog Channel (AUX-2, IRIG-B Channel)
    • 22-1-6. Power Supply System
    • 22-1-7. External Dimensions/Mass
    • 22-1-8. Operating Environment
    • 22-1-9. Supplied Accessories
  • 22-2. Specifications (SIR-3032i/W)
    • 22-2-1. Recording/Playback System
    • 22-2-2. Operation System
    • 22-2-3. Monitor System
    • 22-2-4. Power Supply System
    • 22-2-5. Dimensions and Mass
    • 22-2-6. Operating Environment
    • 22-2-7. Supplied Accessories
• Property
• Back cover