Control by telnet – Sony SIR-3400H Benutzerhandbuch

Seite 113

Advertising
background image

(E)

17-1

SIR-3400H / SIR-3032i / SIR-3032W

17. Control by Telnet

The ETHER (RJ45) connector on the rear panel of the unit uses a signal format compliant with TCP/IP. This
enables control from a host computer by connecting a LAN cable (sold separately).

c
Use a cross cable if the LAN cable is connected directly to another computer.
When controlling a recording unit using Telnet, use the ERR? and ALM? commands to monitor the recording
unit status.

TCP/IP (Telnet) connection

HOST

IP address : 192.168.1.100 (default setting)
Port no.

: 23

Login

: xxxx

Password : sms

After entering this information, the commands can be executed.
Type “quit” to disconnect from Telnet.

Advertising