Sony SIR-3400H - Handbuch (Seite 22)

3-2
(E) SIR-3400H / SIR-3032i / SIR-3032W
Transport Operations Keys
The lamps above the keys light to indicate the active mode.
During transport mode transition, the lamp over the respective key blinks, and no key operation is accepted.
4 ACCESS lamps (1, 2)
Lights when access to the recording media is possible.
The lamps blink while access is in progress.
ACCESS1: Recording media 1 ACCESS2: Recording media 2
Lit green Access possible
Blinking orange HDD operation in progress
5 BOD lamp
Lights when the recording media is at the BOD (beginning of data recorded on the recording media)
position.
6 REW key
Used for the following operations.
. Rewinding data
. Start ID search of the current data
. Manual search (rewind direction)
7 FF key
Used for the following operations.
. Fast-forwarding data
. Start ID search of the next data
. Manual search (fast-forward direction)
8 EOD lamp
Lights when the recording media is at the EOD (end of data recorded on the recording media) position.
9 FWD key
Plays back the data.
0 STOP key
Stops data playback or recording.
c
After the stop key is pressed, a buffer recording for up to 20 seconds is made. As a result, the recording
media may not stop.
qa REC key
Press this key alone to select the E-E mode.
Press this key together with the FWD key to record data.
qs PAUSE key
Used when performing a recording pause or playback pause.
3. Names and Functions of Parts
4 6 7 9 0 qa qs
5 8