Sony SIR-3400H - Handbuch (Seite 27)

(E)
3-7 SIR-3400H / SIR-3032i / SIR-3032W
wg INDEX/ID key
Press this key to increment the value of the INDEX number by 1 in the REC mode.
INDEX number: 01 to 99 (The ID numbers increase up to 99 and then go back to 01.)
When this key is pressed in SEARCH mode, the data for the set INDEX number is searched.
[In SHIFT mode]
Press this key to increment the value of the ID number by 1 in the REC mode.
ID number: 001 to 999
When this key is pressed in SEARCH mode, the data for the set ID number is searched.
These keys wh to ed are used when making the settings below.
Number Key Key by itself In SHIFT mode
wh SPD/BCM key Recording/Playback speed setting Setting for number of recording
channels
wj SPEAKER key Selects the speaker or the
earphone for listening to the
played signal
wk RANGE key Manual range setting Auto range setting
wl OFFSET key Manual input DC offset setting Auto input DC offset setting
e; INPUT key Input format setting
ea SEARCH key Search mode setting
es MEMO key Editing of recording note
ed OUT/TSG key Output level setting Test signal setting
ef MRK1/MRK2 key
Press this key in REC or FWD mode to store the current recording or playback position in the memory.
eg SHIFT key
This key enables the shift operation for each setting key.
Hold the SHIFT key down for at least 2 seconds to switch key operation of the recording unit between
enabled or disabled.
eh PNL LOK lamp
Lights when key operation of the recording unit is set to disable (panel lock mode).
ej f , F, g, G keys
. Used to select items and values.
. Used for changing monitor channels.
f / F key : Every 16 channels
g / G key : Every channel
ek F1 to F4 keys
The functions displayed on the current LCD screen are assigned to F1 to F4 keys. The assigned functions
vary depending on the setting item.
3. Names and Functions of Parts