Sony SIR-3400H - Handbuch (Seite 48)

4-6
(E) SIR-3400H / SIR-3032i / SIR-3032W
4. Preparations
6
Turn the HDD key clockwise.
This locks the cartridge, and turns on the HDD power.
When the power is turned on, the HDD power lamp next to the cartridge turns on.
When the HDD is recognized normally : The recording media access lamp is lit green.
When an error occurred with the HDD : The recording media error lamp is lit red.
7
Close the front panel. Set the right and left lock knobs on the front panel to LOCK, and check that the
front panel is closed properly.
4-3-3. Ejecting the Cartridge
1
Check that the transport mode is set to STOP mode. (See section 5-1.)
2
Check that the ACCESS lamp on the front panel is lit green.
c
Access to the HDD is in progress if the ACCESS lamp is lit orange.
If the front panel is opened during access to the HDD, a warning sound is made. Be sure that access to
the HDD is completed before proceeding.
3
Set the right and left lock knobs on the front panel to RELEASE, and then open the front panel.
4
Check that the internal recording media access lamp is lit green.
5
Turn the HDD key counter-clockwise.
This unlocks the cartridge and turns off the HDD power.
6
Pull out the SMH cartridge while pulling the handle forward.
7
Close the front panel. Set the right and left lock knobs on the front panel to LOCK, and check that the
front panel is closed properly.