Sony SIR-3400H - Handbuch (Seite 50)

4-8
(E) SIR-3400H / SIR-3032i / SIR-3032W
4. Preparations
4-7. Source and Record
If the media position information or amplifier setting information is altered in the STOP mode, the mode
automatically changes to the source mode.
4-7-1. Source
When the unit is in the E-E, REC-PAUSE, or REC mode, or is stopped from one of these modes, it
automatically switches to the source mode. In this mode, source data (values set in the recording unit) is
displayed for the media position information (address, and real-time clock) and the amplifier setting
information (input range value, input DC offset value, and output level value).
In the source mode, press the F3 key to sequentially change the contents displayed as follows.
4-7-2. Record
When the unit is in the FWD mode, or is stopped from FWD mode, it automatically switches to the record
mode. In this mode, record information on the media (values recorded) is displayed for the media position
information (ID number, address, and real-time clock) and the amplifier setting information (input range
value, input DC offset value, and output level value).
In the record mode, press the F3 key to sequentially change the contents displayed as follows.
Address
( ± h/m/s)
Amount of recording
media remaining
(h/m)
Source time
(y/m/d)
Source time
(h/m/s)
F3 F3 F3
F3
Address
( ± h/m/s)
Amount of recording
media remaining
(h/m)
Record time
(y/m/d)
Record time
(h/m/s)
F3 F3 F3
F3