Sony SIR-3400H - Handbuch (Seite 68)

9-2
(E) SIR-3400H / SIR-3032i / SIR-3032W
9-2-2. Switching the Bar Meter Scale (Bar meter Scale)
Factory setting: %
* For the setting procedure, see “9-1. Setting Procedure (for Display Screen)”.
<When set to %>
The scale is bidirectional (the level moves upward in the positive direction or downward in the negative
direction from the center 0 % level line based on the signal polarity), and the data signal level is indicated as
a percentage of the reference level (
±100 %) that was set for the input range.
<When set to dB>
The scale is unidirectional (the level moves in the same direction regardless of the signal polarity), and the
data signal level is indicated as a relative dB value of the reference level (0 dB) that was set for the input
range.
9-2-3. Adjusting LCD Contrast (LCD Contrast)
Factory setting: 5
* For the setting procedure, see “9-1. Setting Procedure (for Display Screen)”.
The LCD contrast can be adjusted in one of eleven levels.
9-2-4. Adjusting LCD Brightness (LCD Brightness)
Factory setting: 5
* For the setting procedure, see “9-1. Setting Procedure (for Display Screen)”.
The LCD brightness can be adjusted in one of eleven levels.
9. Display Settings (Display Screen)
Percentage indicator (bidirectional) Decibel indicator (unidirectional)
101 to 133 %
_101 to _133 %
51 to 100 %
_1 to _50 %
_51 to _100 %
0 %
State when 0 dB
is exceeded
_6 dB
Yellow
Yellow
Green
Green
1 to 50 % Light blue
Light blue
Yellow
Green
_20 dB
2 dB
0 dB
Bluish green
Light blue
Red (over indicator) Red (over indicator)
Red (over indicator)
White
White _∞ dB