Sony SIR-3400H - Handbuch (Seite 78)

12-6
(E) SIR-3400H / SIR-3032i / SIR-3032W
12-6-2. Setting Input DC Offset Automatically
1
Press the SHIFT key, and then press the OFFSET key.
The A lamp at the top right of the key and the channel number in the MONITOR display area flash. 3
second later, the positive and negative peak values of the input signal for each channel are detected and
the DC component is calculated. Until the OFFSET key is pressed again, the peak value detection is
continued.
2
After three or more seconds have elapsed, press the OFFSET key.
The DC input offset value is set for all channels.
12. Operation Settings (Using Setting key)