Sony SIR-3400H - Handbuch (Seite 82)

12-10
(E) SIR-3400H / SIR-3032i / SIR-3032W
12-10. Setting the Output Level
(Modes: STOP, E-E, REC-PAUSE, REC, FWD, and PAUSE)
This procedure changes the output level of the analog channels (CH1 to CH32) for each channel.
1
Press the OUT/TSG key.
The lamp at the top left of the key and the channel number in the MONITOR display area flash. The
Output Level indicator appears in the setting value display area.
2
Use the g / G key to select the target channel.
Setting value : EXP. UNIT 1 to 4, A/B
MONITOR 1 to 32
3
Use the f / F key to change the output level.
The output level can be set in 0.1 V increments in the 1 V to 5 V range.
. Pressing the F1 key applies the settings to all channels of the current channel group (A or B).
. Pressing the F2 key enables the channel setting to be checked on a list. Press the F4 key to return to the
original screen.
4
Press the OUT/TSG key.
The settings are completed.
When not in setting mode, the f, F, g, and G keys can be used to change the monitor channel.
f / F key : Every 16 channels
g / G key : Every channel
12. Operation Settings (Using Setting key)