Sony SIR-3400H - Handbuch (Seite 93)

(E)
14-7 SIR-3400H / SIR-3032i / SIR-3032W
14-6. Bar Meter Auto Adjustment (Barmeter Auto Adjustment)
Because this unit has a high input impedance, when the input format is set to Single-ended, the bar meter
may perform offset recording when the BNC connector is open. Continued usage will not affect the
measurement data or its accuracy, but the offset can be canceled by executing the bar meter auto adjustment.
When executing, set the input format single-ended with the measuring unit front panel S/D selector switch,
and then set the input BNC connector to open.
1
Press the F1 key in the Measurement screen.
The Utility screen is displayed.
2
Use the f / F keys to select “Barmeter Auto Adjustment”.
3
Press the F1 key.
A dialog box is displayed for confirming execution.
4
Press the FWD key while holding down the REC key.
This executes bar meter auto adjustment.
14. Execution of Function/Checking