Sony HKJ-101 - Handbuch (Seite 5)

1-1 (E)
HKJ-101
1-1. Overview
The i.LINK interface board HKJ-101 enables the Digital Video Cassette Compact Player J-H1/J-H3 to
output the down-converted SD video signal in the i.LINK/DV format.
In addition, off-line editing can be executed by connecting the J-H1/J-H3 containing the HKJ-101 board
to the PC containing the non-linear editing software, using an i.LINK/DV cable.
HKJ-101 consists of the followings.
. DV-29 board :
1
. CN-2478 board : 1
. Rear panel for J-H1 : 1
. Rear panel for J-H3 : 1
Beside this Installation Manual, the following manuals are prepared for HKJ-101.
. Operation Manual CD-ROM (Supplied with J-H1/J-H3)
This manual is necessary for practical application and operation of J-H1/J-H3 and HKJ-101.
. Operation Guide (Supplied with J-H1/J-H3)
This manual serves as a quick reference.
. J-H Series Maintenance Manual (e-manual) (Available on request)
This manual describes the information that premises the component service (periodic inspection, ,
periodic maintenance, diagnostics, parts replacement, adjustments, parts list, block diagrams, schematic
diagrams, board layouts and others) to be used by system and maintenance engineers.
If this manual required, please contact your local Sony Sales Office/Service Center.
1-2. Installing the Circuit Board
Procedure is different when installing HKJ-101 in J-H1 and J-H3.
. To install HKJ-101 in J-H1 (Refer to Section 1-2-1.)
. To install HKJ-101 in J-H3 (Refer to Section 1-2-2.)
n
Before starting installation, be sure to turn off the POWER switch and disconnect the power cord. Then
start the following procedures.
Section 1
Installation