Sony FD Trinitron KV-28FC60-Z - Handbuch (Seite 22)

20
Using the Further Programme Preset function
Using the menu Further Programme Preset you can
a) individually adjust the volume level of each channel.
b) improve the quality of a weak channel (picture or sound distortions) with
manual fine tuning.
c) preset the AV output for programme positions of those channels with
scrambled signals (e.g. from a Pay TV decoder). In this way a connected
Smartlink VCR records the unscrambled signal.
1 Press MENU. Select the symbol using $. Push to ” to enter.
2 Select Installation using $. Push to ” to enter. Select Further Programme Preset
using $. Push to ” to enter.
3 Select the programme position of the desired channel by pushing to 4 or $.
Push repeatedly to ” to select:
VOL (Volume Offset), AFT (Automatic Fine Tuning) or DECODER.
The selected item changes colour.
4 a VOL
Push to 4 or $ to adjust the volume level (range -7 to +7) of the channel.
Store by pressing OK.
Repeat steps 3 and 4a if you wish to adjust the volume level of other channels.
b AFT
Push to 4 or $ to fine tune the channel (range -15 to +15). Store by pressing OK.
Repeat steps 3 and 4b if you wish to fine tune other channels.
c DECODER
Push to 4 or $ to select AV1 (Euro AV socket 1) or AV2 (Euro AV socket 2) as
output for the video source on this programme position. Store by pressing OK.
Repeat steps 3 and 4c if you wish to preset the AV output of other video sources.
Should you use Auto Tuning afterwards, this setting will
be cancelled.
5 Press MENU to return to the normal TV screen.
Operation (TV menu system):
Installation
Select: Enter:
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Speaker Configuration
Personal ID
O
- - - - - - -
Further Programme Preset
Select: Enter:
PROG AFT VOL DECODER
On
On
On Off
Off
Off 0
0
0 1
2
3
4
5
6
7
8
9
10
11
Internal
PROG AFT VOL DECODER
1 0
PROG AFT VOL DECODER
1 -5 On
PROG AFT VOL DECODER
1 -5 On Off
AV1
AV2
Adjusting the picture geometry for an RGB source
When connecting an RGB source such as a Sony playstation you may need to
readjust the picture geometry.
1 Select the connected RGB source … 1 by pressing … repeatedly.
2 Press MENU. Select the symbol using $. Push to ” to enter.
3 Select Installation using $. Push to ” to enter. Select RGB Set Up using $.
Push to ” to enter.
4 Select H Centre by pushing to ”. Adjust the centre of the picture
(range from -10 to +10) using 4 or $. Store by pressing OK.
5 Select H Size using $. Push to ” to enter. Adjust the horizontal coordinates
(range from -10 to +10) using 4 or $. Store by pressing OK.
6 Press MENU to return to the normal TV screen.
RGB Set Up
Adjust Size: Confirm: OK
H Centre O
H Size O
RGB Set Up
Adjust Position: Confirm: OK
H Centre O
H Size O