Kodak EX-811 - Manual (Page 38)

31 www.kodak.com/go/support
Troubleshooting and support
(Continued ) The wireless router did not assign a valid network IP address to the
frame. Check and change the router settings, as indicated below.
You can usually view the network settings with the software
program included with the router.
■ Enable DHCP on the router.
■ Change the setting on the router to allow both 802.11b and
802.11g Wi-Fi protocols.
■ Change router settings to allow enough IP addresses for the
number of wireless devices on the network.
■ Disable MAC filtering on the router or enable the MAC for the
frame.
■ Temporarily disable the QoS (Quality of Service) setting on the
router.
■ Check with the router manufacturer for a possible firmware
update.
See the router documentation for details.
Frame cannot connect to
Kodak EasyShare Gallery. ■ The Gallery URL, account email address, or account password
on the frame are incorrect.
■ Make sure the wireless router is connected to the Internet and
an Internet connection is available.
■ The Gallery or online picture service is temporarily unavailable.
Try again later.
■ There may not be an EasyShare Gallery service in the region you
are in.
See Frame cannot connect to the wireless network, above, for other
possible causes and/or solutions.
Problem Possible causes and/or solutions