Installation – Panasonic GP-KS1000E Benutzerhandbuch

Seite 10

Advertising
background image

-8-

The camera head can be installed on the ceilling, wall
or etc. by using the threaded 1/4”-20 UNC screw hole
of the camera holder (optional accessory).

1. Loosen the screw of the camera holder until it is

tight and insert the camera head into it as shown
below.

2. Adjust the tilt angle and rotation of the camera head

and secure the camera and camera holder by tight-
ening the screw.

3. Install the camera with camera holder onto the tri-

pod or other mounting bracket.

Caution:

If the optional C-mount lens size exceeds

50mm (2”) in diameter, 70mm (2-3/4”) in length
and 300g (0.66 lbs) in weight, both the camera
and lens should be secure.

Holding position

Screw

Approx.
130°

Marker (Red, Green, Blue)

31.5 (1-1/4”)

1/4”-20UNC

8 (5/16”)

11

(7/16”)

14

(9/16”)

20

(3/4”)

14

(9/16”)

20 (3/4”)

4-

φ

3.3 (4-

φ

1/8”)

Unit: mm (inches)

INSTALLATION

Advertising