Precautions – Panasonic GP-KS1000E Benutzerhandbuch

Seite 4

Advertising
background image

-2-

• Do not attempt to disassemble the camera or the

camera control unit.
To prevent electric shock, do not remove screws or
cover. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.

• Do not expose the camera or camera control unit to

rain or moisture, or do not try to operate it in wet
conditions.
Take immediate action if the camera or camera con-
trol unit becomes wet. Turn power off and refer ser-
vicing to qualified service personnel.
Moisture can damage the camera and camera con-
trol unit and can cause electric shock.

• Ambient Temperature range

Do not install the camera in the place where the
temperature is beyond –10°C - +40 °C (14 °F - 104
°F).

• Never crush or pinch the camera cable.

Don't wind or bend the camera cable into a small
circle.

• Never face the camera toward the sun, whether in

use or not.
Use caution when operating the camera in the vicin-
ity of spot lights or other lights and light reflecting
apparatus.

• Maintenance

After pressing the DC Power ON/OFF switch off,
clean it with a dry cloth. If it is difficult to clean it of
dirt or dust, use a cloth with detergent.
Use the lens cleaning tissue paper (may be avail-
able at your local camera store) for lens cleaning.

• Connect this to a DC12V, CLASS 2 power supply

only.

• After using the camera, turn off the DC Power

ON/OFF Switch and put the lens cap on the camera
head.

• Connect together only the camera head and the

camera control unit which are packed in the same
box (a pair). Otherwise it may cause improper oper-
ation.

• Every necessary procedures with regard to installa-

tion should be made by qualified service personnel
or system installer.

Caution:

Connecting or disconnecting camera cable to/from
the camera control unit or the camera must be done
after turning the DC Power ON/OFF Switch to the OFF
position. Failure to do this may damage the camera
head.

PRECAUTIONS

Advertising