Yamaha CDR-D651 - Handbuch (Seite 14)

E- 13
GETTING ST
AR
TED
PLA
YB
A
C
K
RECORDING
ADDITIONAL
INFORMA
TION
ENGLISH
........................................................RECORDING TO A DISC
■ To start recording
1.
Press REC.
This unit enters the record pause mode.
2.
Select the appropriate input signal to be used
for recording by pressing the INPUT button.
(See page 14 for details.)
3.
Adjust the recording level.
(See page15 for details.)
The recording level can be adjusted when making
digital and analog recordings. However the recording
level cannot be changed when making a CD DIRECT
copy.
4. Press w/d (w on the remote) to start recording.
5.
Start playing the source.
6.
Press w/d (d on the remote) to pause recording
temporarily.
“Standby” lights in the display.
7.
To resume recording, press w/d (w or d on the
remote).
8. Press a to stop recording.
“Wait” lights in the display while information is being
written to the PMA (Program Memory Area).
9. Finalize the disc when recording is complete.
See page 21 for the finalization procedure.
10. Press v (OPEN/CLOSE B on the remote) to
open the disc tray and remove the disc.
11.
Press v (OPEN/CLOSE B on the remote) again
to close the tray.
12.
Press POWER to turn off the power when you
have finished using this unit.
NATURAL SOUND CD RECORDER CDR–D651
POWER
DISC A DISC B
DISPLAY A TEXT/TIME DISPLAY B
Recordable ReWritable
COPY
REC MODE TRACK NO.
FINALIZE ERASE
INPUT MULTI JOG
DIGITAL REC LEVEL
DISC A DIGITAL ANALOG PUSH MODE
PHONES LEVEL
MIN MAX
ANALOG REC LEVEL
MIN FADE IN/OUT MAX
REC MUTE REC
12 10,11 2 9
1 4,6,7
8
COPY
A
FADE IN/OUT
REC REC MUTE
TRACK NO.
WRITE
REC MODE FINALIZE ERASE
TIME TEXT DIMMER
0
SPACE
+10
SYMBOL PROG
DISPLAY
A/B INPUT
OPEN/CLOSE B
REPEAT RANDOM CLEAR
MENU
EDIT DELETE SET
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ
A B
4,7
8
6,7
10,11
1
9
2
S t a n d b y CD–R REC
L
dB
R
–60 –30 –I0 –6 –4 –2 –I 0 OVER
Important
• Do not turn off the power during recording. If the
power is turned off, recorded material may be lost or
the disc may not perform normally.
• If the power is turned off while recording on a CD-R
disc, any material recorded before the information is
written to the PMA (Program Memory Area) will be lost
and further recording on that disc will not be
possible.
• During recording, make sure that this unit is not
subjected to shock or vibration as it may cause skips
or jumps to be included in the recording.