Yamaha CDR-D651 - Handbuch (Seite 20)

E- 19
GETTING ST
AR
TED
PLA
YB
A
C
K
RECORDING
ADDITIONAL
INFORMA
TION
ENGLISH
......................................................RECORDING FUNCTIONS
REC Mute
Press REC MUTE to create a blank space at the end of
recording. A 4-second blank space is recorded, and this
unit enters the record pause mode. To create a blank space
longer than 4 seconds, press and hold REC MUTE.
When REC MUTE is released, this unit enters the record
pause mode. During the REC MUTE operation, the REC
indicator blinks.
DISC B Recordable ReWritable
COPY
REC MODE TRACK NO.
FINALIZE ERASE
INPUT MULTI JOG
DIGITAL REC LEVEL
DISC A DIGITAL ANALOG PUSH MODE
ANALOG REC LEVEL
MIN FADE IN/OUT MAX
REC MUTE REC
REC MUTE
COPY
A
FADE IN/OUT
REC REC MUTE
TRACK NO.
WRITE
REC MODE FINALIZE ERASE
TIME TEXT DIMMER
DISPLAY
A/B INPUT
OPEN/CLOSE B
REC MUTE
Fade In/Fade Out Function
This unit has a fade-in function to gradually rise the
recording level at the start of recording and a fade-out
function to gradually lower the recording level at the end of
recording.
■ Fade In
While this unit is in the record pause mode, press REC to
start a recording with a fade-in. During this recording, the
REC indicator blinks in the display.
Fade-in lasts about 3 seconds. However it is possible to
adjust the fade-in time between 1 and 10 seconds in the
menu settings.
■ Fade Out
Press REC during recording to end the recording with a
fade-out. This unit enters the record pause mode when
fade-out recording is complete. Fade-out time can also be
adjusted in the menu settings.
■ To change the fade-in and fade-out time
1.
While this unit is in the record or stop mode,
press and rotate the MULTI JOG knob (MENU
and +/– on the remote) to select “FadeIn time” or
“FadeOutTime” in the set menu.
2. Press the knob (MENU on the remote) again and
rotate the knob (+/– on the remote) to set the
desired time between 1 and 10 seconds.
3. Press the MULTI JOG knob (MENU on the
remote) again to enter the time setting. This
setting remains even when the power is turned
off.
CD TEXT Copying and Editing
This unit is CD TEXT compatible. When digitally recording a
disc with CD TEXT data, the data is automatically recorded
onto the disc loaded on the disc tray B. It is also possible to
edit CD TEXT data on the newly recorded disc.
■ CD TEXT copying
CD TEXT data is automatically copied as the source CD is
recorded, when recording a source CD with CD TEXT data
(23 characters maximum) placed on the disc tray A onto a
disc placed on the disc tray B with DISC A selected using
INPUT, or with the CD DIRECT copy function. To save the
CD TEXT data on the disc, perform finalization. CD TEXT
data is displayed by pressing TEXT/TIME on the front panel
(TEXT on the remote). See page 10 for details.
CD TEXT copying cannot be made when doing manual
recording.
DISPLAY A TEXT/TIME DISPLAY B
PHONES LEVEL
MIN MAX
TEXT/TIME
COPY
A
FADE IN/OUT
REC REC MUTE
TRACK NO.
WRITE
REC MODE FINALIZE ERASE
TIME TEXT DIMMER
DISPLAY
A/B INPUT
OPEN/CLOSE B
TEXT
Note
• Some CD TEXT data cannot be copied if they are protected by
copyright.