Additional information, Display messages – Yamaha CDR-D651 Benutzerhandbuch

Seite 30

Advertising
background image

E-

29

GETTING ST

AR

TED

PLA

YB
A

C

K

RECORDING

ADDITIONAL

INFORMA

TION

ENGLISH

.................................................. ADDITIONAL INFORMATION

Display Messages

Can’t Copy

Digital recording cannot be performed. (See “SCMS
copy protection” on page 28.)

Check Disc

This is displayed when the recorder stops after reading
disc information, while performing an erase procedure,
finalization, or OPC. If this occurs, the disc may be dirty
or possibly even damaged. Remove the disc and
inspect it.

Close

The disc tray is being closed.

Data Track

This is displayed when the data track is played back.

Disc Full

Recording is not possible because there is no blank
space remaining on the disc.

Erase ALL?

Erases all tracks on a CD-RW disc.
If you want to erase all tracks, press w/d (w on the
remote).

Erase DISC?

Erases all of the information a CD-RW disc.
If you want to erase all of the information, press w/d (w
on the remote).

Erase LAST?

Erases the last track on a CD-RW disc.
If you want to erase the last track, press w/d (w on the
remote).

Erase TOC?

Erases the TOC (Table Of Contents) on a CD-RW disc.
If you want to erase the TOC, press w/d (w on the
remote).

Finalize?

Finalizes the CD.
If you want to finalize the disc, press w/d (w on the
remote).

Finalized

Recording has been attempted on a CD-RW disc that
has already been finalized.

Finalizing

During the finalization process, the TOC (Table Of
Contents) is being written onto the disc.

New Disc

The disc in the disc tray is either a new CD-R or CD-RW
disc or a CD-RW disc that has been erased using the
Erase ALL or Erase DISC function.

No Disc

There is no disc on the disc tray.

No Input

The digital input is selected, but the connections are not
correct, or the digital signal is not being output from the
source device. Please check all cabling, and the status
of the source device.

Not Audio

The inserted disc is not an audio CD-R or CD-RW disc.
This is displayed when REC, FINALIZE, or ERASE is
pressed.

OPC Adjust

Adjustments performed when OPC (Optimum Power
Calibration) optimizes the laser power to the reflectivity
of the disc. Some time is required to complete these
automatic adjustments.

Open

The disc tray is being opened.

Reading

When the recorder is turned on or a disc is loaded, the
recorder reads the format of the disc loaded in the
recorder.

Standby

This unit has been put in the standby mode.

TEXT Save?

This is displayed if you attempt to open the disc tray
without performing finalization after CD TEXT data is
copied or edited.

Track Full

Recording is not possible because the maximum
number of 99 tracks has already been recorded on the
disc.

Wait

The recorder has been put in the stop mode from the
record mode and information is being written to the PMA
(Program Memory Area). Never turn the power off when
this is displayed.

Advertising