RIEDEL IF-2104 Benutzerhandbuch

If 2104

Advertising
background image

IF 2104

IF 2104 Vorderansicht / IF 2104 front view

4-Kanal 2/4-Draht Interface

Das 4-Kanal 2/4-Draht Interface IF-2104 ist ein 19“/
1HE-Einschub und dient zur Umsetzung der vier Party-
Line Kanäle auf galvanisch isolierte Audio Ein- und
Ausgänge (4-Draht).

Die 4-Draht Anschlüsse sind als getrennte XLR-Ein-
und Ausgänge ausgeführt. Der Abgleich der 2/4-Draht
Gabelschaltung erfolgt automatisch und bietet beson-
ders hohe Rück-Dämpfung.

Die Ein- und Ausgangspegel der Vierdraht-Seite sind
über Trimmer an der Gerätevorderseite einstellbar.
Die vier Logikeingänge des IF-2104 senden wahlweise
einen Lichtruf oder S-CALL (einstellbar über
Dipschalter auf der Frontplatte) in den entsprechenden
Intercomkanal.

Ebenso stehen vier konfigurierbare Relaisausgänge
zur Verfügung, die wahlweise auf eingehenden Lichtruf
oder S-Call (einstellbar über Dipschalter auf der
Frontplatte) reagieren. Damit lassen sich Verstärker
hochschalten, Durchsage-Einrichtungen aktivieren und
Funksender hochtasten.

Der Anschluss der Intercom-Partyline erfolgt
über 3-polige XLR mit Durchschliff, die Vierdraht-
Verbindungen sind getrennt für Ein- und Ausgang
als trafosymmetrische 3-polige XLR ausgeführt. Die
Haltezeit der Relais ist über Trimmer an der Frontplatte
einstellbar.

Das IF-2104 ist kompatibel zu ASL®, Clear-Com® und
RTS/Telex® Systemen.

4-channel 2/4-wire interface

The 19“/1RU 4-channel 2/4-wire interface IF-2004
converts four partyline channels to transformer balan-
ced audio inputs and outputs (4-wire) on individual XLR-
connectors.

The IF-2104 is a plug-and-play interface. The input and
output levels of the four-wire side can be adjusted by
means of trimmers on the front panel of the unit.

The IF-2104 provides four logic inputs which activate
either a call light signal or an S-CALL (can be set up
by means of dip switches on the front panel) to the
appropriate intercom channels.

Also provided are four configurable relay outputs which
react to either incoming call light signals or S-Calls (can
be set up via dip switches on the front panel).

You can adjust the holding time of the relays on the
front panel using trimmers as well.

The intercom party line is connected by means of a 3-
pin XLR with loop-through, the four-wire connections are
transformer-balanced and provided on separate 3-pin
XLRs for input and output.

The IF-2104 is compatible with ASL®, ClearCom® and
RTS/Telex® systems.

Riedel Communications GmbH

|

Uellendahler Straße 353

|

42109 Wuppertal, Germany

Phone: +49 (0) 202 292 - 90

|

Fax: +49 (0) 202 292 - 99 99

|

www.riedel.net

Riedel Communications GmbH

|

Uellendahler Straße 353

|

42109 Wuppertal, Germany

Phone: +49 (0) 202 292 - 90

|

Fax: +49 (0) 202 292 - 99 99

|

www.riedel.net

Advertising