Washing programmes – Zanussi ZWG6120P Benutzerhandbuch

Seite 16

Advertising
background image

7.1

7.2

7.3

Indicator pilot lights

Einde

Fin

Extra spoelen

Rinçage plus

Hoofdwas

Lavage

• When you start the programme by pressing the button 6 , the washing

phase pilot light ( 7.1 ) illuminates. This means that the appliance is

operating.

• The additional rinses pilot light ( 7.2 ) illuminates when the appliance

performs an extra rinse.

• When the programme has finished the end cycle pilot light ( 7.3 )

comes on.

At the end of the programme

The appliance stops automatically. The pilot light of the

button 6 and the pilot light corresponding to the just fin-

ished washing phase go off. The light 7.3 illuminates.

If a programme or an option that ends with water left in

the tub has been selected and the door remains locked

to indicate that the water must be emptied out before

opening the door.

Follow the below instructions to empty out the water:
• Turn the programme selector dial to .
• Select the draining or spinning programme.
• Reduce the spin speed if needed, by pressing the rel-

evant button.

• Press the button 6 .

At the end of the programme, the door can be now
opened. Turn the programme selector dial to to

switch the appliance off.

Remove the laundry from the drum and carefully check

that the drum is empty. If you do not intend to carry out

another wash, close the water tap. Leave the door open

to prevent the formation of mildew and unpleasant smells.

Warning! If there are children or pets in the

house, activate the child safety device in the inner

side of the door frame (for more details read " Child safe-

ty" in the chapter "Safety Information").

Stand by : during programme setting up and once

the programme has finished, if the programme se-

lector dial and any button are not touched, after a few

minutes the energy saving system is enabled. The pilot

lights go off. The green pilot light of the button 6 flash-

es with a low frequency. By pressing any button the ap-

pliance will come out of the energy saving status.

Door seal

At the end of every cycle,

check from the door seal

and remove objects that

could be trapped in the

fold.

Washing programmes

Programme - Maximum and Minimum Temperature - Cycle De-

scription - Maximum Spin Speed - Maximum Fabrics Load -

Type of Laundry

Options

Detergent Com-

partment

COTTONS

90°-Cold

Main wash - Rinses - Maximum spin speed at: 1200 rpm

(ZWG6120P); 1400 rpm (ZWG6140P)
Max. load 6 kg - Reduced load 3 kg

1)

White, coloured cotton and linen . Normally soiled items.

AUTOMATIC SPIN RE-

DUCTION,

RINSE HOLD ,

DELAY START ,

SUPER QUICK ,

EXTRA RINSE

16

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: