Quick start, Installation, Interface connector – Acer P5205 Benutzerhandbuch

Seite 2: Schnellstart, Schnittstellenanschluss, English deutsch

Advertising
background image

Quick Start

INSTALLATION

1. Power cord
2. VGA cable
3. VGA to component video/HDTV

adapter

4. Composite video cable
5. Audio cable
6. S-Video cable
7. RS232 cable
8. HDMI cable
9. 3 RCA component cable
10. RJ45 cable

Note: Connector interface is subject to model's specifications

INTERFACE CONNECTOR

1. Ensure the projector and your

computer are turned off.

2. Connect one end of the VGA cable to

the "VGA IN 1" or "VGA IN 2"
connector on the projector; connect
the other end to the VGA connector
on the computer and tighten the
screws.

3. Connect one end of the power cord

into the AC power socket on the
projector; connect the other end to an
electrical outlet.

1. Remove the lens cap.
2. Turn on the projector first and then

the computer.

3. Adjust the position, focus and zoom.
4. Run your presentation.

1. Press the power button twice.
2. Do not remove AC power cord from

outlet until the projector fans shut
down.

Schnellstart

INSTALLATION

1. Netzkabel

2. VGA-Kabel

3. VGA-auf-Component-Video/HDTV-

Adapter

4. Composite-Videokabel

5. Audiokabel

6. S-Videokabel

7. RS232-Kabel

8. HDMI-Kabel

9. 3 RCA Component-Kabel

10. RJ45-Kabel

Hinweis: Die Anschlussschnittstelle variiert je nach dem Modell.

SCHNITTSTELLENANSCHLUSS

1. Stellen Sie sicher, dass der Projektor

und Ihr Computer ausgeschaltet sind.

2. Verbinden Sie ein Ende des VGA-

Kabels mit dem "VGA IN 1" oder

"VGA IN 2-Anschluss am Projektor.

Verbinden Sie das andere Ende des

Kabels mit dem VGA-Anschluss am

Computer und ziehen die Schrauben

fest.

3. Verbinden Sie ein Ende des

Netzkabels mit dem

Wechselstromeingang am Projektor

und verbinden das andere Ende mit

einer Steckdose.

1. Entfernen Sie die

Objektivabdeckung.

2. Schalten Sie zuerst den Projektor

und dann den Computer ein.

3. Passen Sie die Position, den Fokus

und den Zoomfaktor ein.

4. Führe Sie Ihre Präsentation aus.

1. Drücken Sie zweimal den

Stromschalter.

2. Ziehen Sie erst dann das Netzkabel

aus der Steckdose heraus, wenn das

Gebläse des Projektors

ausgeschaltet ist.

1

2

Connecting to a Computer

Powering On the Projector

Powering Off the Projector

1

2

Verbinden mit einem Computer

Einschalten des Projektors

Ausschalten des Projektors

English

Deutsch

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: