Samsung LE40B679T2S - Handbuch (Seite 31)

English - 2
Melody → Off / Low / Medium / High
A melody sound can be set to come on when the TV is powered On or Off.
The Melody does not play
When no sound is output from the TV because the MUTE button has been pressed.
When no sound is output from the TV because the volume has been reduced to minimum with the volum (-) button.
When the TV is turned off by Sleep Timer function.
PIP
For detailed procedures on setting up options, refer to the ‘Viewing Picture-in- Picture’ instructions. (refer to page 21)
Common Interface
CI Menu
This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
Application Info.
This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the ‘CI(CI+)
Card’. You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2. Insert the ‘CI(CI+) Card’ into the CAM in the direction of the arrow until it fits.
3. Insert the CAM with the ‘CI(CI+) Card’ installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal channel.
The insertion of some CAM models may disable the receipt of the DVB-S2 channel.
Setting the Time
Clock
Setting the clock is necessary in order to use the various timer features of the TV.
The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
Clock Mode
You can set up the current time manually or automatically.
Auto: Set the current time automatically using the time from the digital broadcast.
Manual: Set the current time to a manually specified time.
Depending on the broadcast station and signal, the auto time may not be set correctly. If
this occurs, set the time manually.
The Antenna or cable must be connected in order to set the time automatically.
Clock Set
You can set the current time manually.
This function is only available when Clock Mode is set to Manual.
You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.
■
N
•
•
•
■
■
●
●
N
¦
❑
O
N
■
●
●
N
N
■
N
N
Plug & Play
Time ▶
Language
Subtitile
Digital text : Enable
Security
Network
General
Setup
BN68-01900G-Eng.indb 28 2009-05-12 �� 4:01:49