Samsung LE40R74BD - Handbuch (Seite 13)

English-11
You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu.
Press
the or button to select "Picture", then press the ENTER button.
2. Press the ENTER button again, to select "Mode".
3. Press the ENTER button again, to select "Mode".
4.
Press the or button to select the desired picture effect. Press the ENTER button.
5. Press the EXIT button to exit.
ΠDynamic: Selects the picture for high-definition in a bright room.
ΠStandard: Selects the picture for optimum display in a normal environment.
ΠMovie: Selects the picture for comfortable display in a dark room.
ΠCustom: Select to view your favorite display settings. (Refer to "Adjusting the Custom Picture")
You can also press the P.MODE
button on the remote control to
select one of the picture settings.
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 12)
Changing the Picture Standard
ΠContrast: Adjusts the lightness and darkness between objects and the background.
ΠBrightness: Adjusts the brightness of the whole screen.
ΠSharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
ΠColour: Adjusts the colours, making them lighter or darker.
ΠTint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 4.
2.
Press the or button to select a particular item. Press the ENTER button.
3. Press the or button to decrease or increase the value of a particular item.
Press the ENTER button.
4. Press the EXIT button to exit.
Adjusting the Custom Picture
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 4.
2. Press the or button to select "Colour Tone", then press the ENTER button.
3.
Press the or button to select the desired colour tone setting.
Press the ENTER
button.
4. Press the EXIT button to exit.
Changing the Colour Tone
ΠCool2: Makes the colour temperature bluer than "Cool1" menu.
ΠCool1: Makes whites bluish.
ΠNormal: Keeps whites white. ΠWarm1: Makes whites reddish.
ΠWarm2: Makes the colour temperature redder than
"Warm1" menu.
The adjusted values are stored according to the selected Picture mode.
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
1. Press the MENU button to display the menu.
Press
the or button to select "Channel", then press the ENTER button.
2. Press the or button to select "LNA", then press the ENTER button.
3. Press the or button to select "On" or "Off". Press the ENTER button.
4. Press the EXIT button to exit.
BN68-01007H-01Eng.indd 11 BN68-01007H-01Eng.indd 11 2006-05-16 ¿АИД 1:54:29 2006-05-16 ¿АИД 1:54:29