Auto-tuning the tv – Sony KDL-46V2500 Benutzerhandbuch

Seite 6

Advertising
background image

6

GB

3

Press

F

/

f

to select the language

displayed on the menu screens, then press

.

4

Press

F

/

f

to select the country/region in

which you will operate the TV, then press

.

If the country/region in which you want to use the
TV does not appear in the list, select “-” instead of
a country/region.
The message confirming the TV start auto-tuning
appears on the screen, then go to “6: Auto-tuning
the TV”.

6: Auto-tuning the TV

The TV will now search for and store all available TV
channels.

1

Before you start auto-tuning the TV, insert
a pre-recorded tape into the VCR
connected to the TV (page 4) and start play
back.

The video channel will be located and stored on
the TV during auto-tuning.
If no VCR is connected to the TV, this procedure
is not required. Go to step 2.

2

Select “OK”, then press

.

The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, please be
patient and do not press any buttons on the TV or
remote.
If a message appears for you to confirm the aerial
connections
No digital or analogue channels were found.
Check all the aerial connections and press

to

start auto-tuning again.

3

When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” (page 28).

If you do not wish to change the order in which the
analogue channels are stored on the TV, go to step
4.

4

Press MENU to exit.

The TV has now tuned in all the available
channels.

4

2

010COV.book Page 6 Friday, January 12, 2007 9:37 AM

Advertising