Sony KLV-S32A10E - Handbuch (Seite 12)

12
GB
1
Connect your aerial with the coaxial cable.
If connecting to an aerial only (A)
Connect your aerial to the socket on the rear of
the TV, then go to step 3.
If connecting to a VCR with an aerial (B)
Connect your aerial to the input socket on your VCR.
2
Connect your VCR.
1 Connect the output socket on your VCR to the
socket on the rear of the TV with the RF lead.
2 Connect the scart socket on your VCR to the
/ 2 scart socket on the rear of the TV
with a scart lead.
3
Connect the supplied mains lead to the AC
IN socket on the rear of the TV.
Note
Do not connect the mains lead to your mains socket until
all connections are complete.
4
Bundle the cable.
4: Preventing the TV
from toppling over
After all connections are completed, secure the TV.
1
Fasten the supplied support belt to the
stand with a screw.
2
While supporting the TV, tighten the
supplied support belt to adjust the length.
3
Fit the supplied support belt to the TV
stand, then firmly fasten with the supplied
screw using a screw driver or coin, etc.
5: Switching on the TV
1
Connect the TV to your mains socket (220-
240V AC, 50Hz).
2
Press 1 on the TV (Top side).
When you switch on the TV for the first time, the
language menu appears on the screen, then go to
“6: Selecting the language and country/region.
When the TV is in standby mode (the
1 (standby)
indicator on the front of the TV is red), press TV
+/1 on the remote to switch on the TV.
6: Selecting the language
and country/region
When you switch on the TV for the first time, the
Language menu appears on the screen.
1
Press m/M/</,
to select the
language
displayed on the
menu screens,
then press OK.
1
3
2
SONY
1
2
1,2
1,2
Language
Select Language
English
Nederlands
Français
Italiano
Deutsch
Türkçe
Ελληνικά
Español
Português Polski
Česky
Magyar
Русский
Бьлгарски
Suomi
Dansk
Svenska
Norsk