Sony KLV-S32A10E - Handbuch (Seite 14)

14
GB
Watching TV
1
Press 1 on the TV (Top side) to switch on
the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the front of the TV is red), press TV
"/1 on the remote to switch on the TV.
2
Press the number buttons or PROG
+/- to select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second digit within two
seconds.
Additional operations
Watching TV
2
1
2
1
1
SONY
To Do this
Turn off the TV
temporarily
(Standby mode) Press TV "/1.
Turn on the TV from
Standby mode
without sound. Press % . Press 2 +/- to set the
volume level.
Turn off the TV
completely Press 1 on the top side of the
TV.
Adjust the volume Press 2 + (increase)
/- (decrease).
Mute the sound
Return to the
previous channel
watched (for more
than five seconds)
Press %. Press again to restore.
Press .
Access the
Programme index
table Press OK. To select a channel,
press
m/M, then press OK.
To access the Input
signal index table,
see page 16 Press OK. Press , to select
the desired input signal, press
m/M, then press OK.