Screen menu – Sony VPL-HW50ES Benutzerhandbuch

Seite 55

Advertising
background image

55

U

s

in

g t
he M

e

n

u

s

Screen Menu

The Screen menu is used to adjust the input signal. You can adjust the size of the picture,
and select aspect mode, etc.

.

These items may not be available, depending on the type of input signal. For details, see “Input
Signals and Adjustable/Setting Items” (

1 page 83).

Item names in brackets represent those printed on the remote control.

Note

Aspect [ASPECT]

Sets the aspect ratio of the picture to be displayed for the current
input signal. (

1 page 33)

Wide Zoom: A 4:3 aspect ratio picture is projected naturally to fill the

screen. The upper and lower portions of the picture are cropped.

Zoom: A 4:3 aspect ratio picture is enlarged vertically and horizontally

in the same ratio to fill the screen. The upper and lower portions are
cropped. This mode is suitable to view a letterbox picture.
If a movie subtitle, etc., at the bottom of the picture cannot be seen, it
can be displayed by adjusting “Vertical Size” or “V Center.” (

1 page

56)

Normal: Displays a picture on the whole of the screen, maintaining the

aspect ratio of the input picture. This is suitable for 16:9 or 4:3
pictures.

Stretch: A picture squeezed to 4:3 is displayed in 16:9 aspect ratio.
V Stretch: A 2.35:1 picture is displayed after having been changed to

16:9. This is the most suitable mode when using a commercially
available anamorphic lens.

Squeeze: Displays in its original aspect ratio when a 16:3 or 4:3 picture

is viewed using a commercially available anamorphic lens.

Full: Displays an original picture on the whole of the screen. Only when

a computer signal is input.

• When a computer signal is input, you can only select “Normal” and

“Full.”

• When the input is a 3D signal or when “2D-3D Display Sel.” in the

Function

menu is set to “3D”, you can only select “Normal” or

“Squeeze.”

Notes

Advertising