3d video images others – Sony VPL-HW50ES Benutzerhandbuch

Seite 71

Advertising
background image

71

Oth

e

rs

3D video images

Others

Symptom

Cause and Remedy

The video image does not
seem like 3D video images.

c Check if the 3D glasses are turned on (1 page 37).
c Make sure that the battery in the 3D glasses is charged.
c Check if the input source is HDMI.
c Set “2D-3D Display Sel.” to “Auto” or “3D” (1 page 59).
c Check if the input signals are compatible 3D signals (1 page

85).

c If no 3D signal is input from the 3D equipment connected to the

projector, restarting the connected 3D equipment may solve the
problem.

c When the viewing or projector position is too far from the

screen, the 3D glasses may not be able to display the images
properly (

1 page 38).

c If you use the optional 3D Sync Transmitter, check that it is

placed within the specified range (

1 page 28).

c The screen size is not appropriate. Set the zooming

magnification to low or watch the image from farther away from
the screen (

1 page 91).

Symptom

Cause and Remedy

The fan is noisy.

c Check the setting of “Cooling Setting” in the Setup

menu.

(

1 page 57)

c Make sure that the room temperature is not too high.
c Check the installation conditions. (1 page 13)

The number of fan rotation increases to maintain the product
reliability of the projector’s components in a room, where the
temperature is higher than normal. The fan noise becomes
slightly louder. The approximate normal temperature is 25°C.

The lens shift cannot be
adjusted.

c The lens shift cannot be adjusted over the range of movement.

Adjust the lens shift within the range of movement (

1

pages 16, 23).

The projector and
connected equipment turn
On/Off, play back, and
operate at the same time.

c “Control for HDMI”, “Device Auto Power Off”, and “PJ Auto

Power ON” are set to “On”. Set them to “Off”.
For details, see “HDMI Setting” (

1 page 60).

Advertising