Sony HKDW-702 - Handbuch (Seite 6)

1-4 (E)
HKDW-702
1-5. Installing the VIDEO OUT Assembly
1. Remove the inside panel.
2. Remove the two screws (P2 x 4) and remove the CN
BOX sub panel.
3. Attach the VIDEO OUT assembly with the two screws
(P2
x 4) by routing the coaxial cable through the
groove.
m
. When installing the VIDEO OUT assembly, route
the coaxial cable through a groove.
. If the coaxial cable is pinched by the VIDEO OUT
assembly and the frame, the coaxial cable can be
damaged.
n
Standard tightening torque value :
Screw P2 x 4
16 to 22 x 10 _2 N .m (1.6 to 2.2 kgf.cm)
P2 x 4
CN BOX sub panel
Coaxial cable
(black)
Groove
P2 x 4
VIDEO OUT assembly
*1
*1
Step 2
1-6. Installing the HKDW-702 (DC-110A
Board)
1. Align the hole of the shield plate with connector
(CN6) of the DCP-28 board and insert the connector
(CN6) of the DC-110A board to the connector (CN6)
of the DCP-28 board.
2. Attach the DC-110A board with the three screws (P1.4
x 3.5) supplied.
n
Standard tightening torque value :
Screw P1.4 x 3.5
0.1 N .m (1.0 kgf.cm)
3. Connect the coaxial cable (black) coming from the
VIDEO OUT assembly to the connector (CN1) of the
DC-110A board.
1-5. Installing the VIDEO OUT Assembly
1-6. Installing the HKDW-702 (DC-110A Board)
DC-110A
board
Precision
screws
P1.4
x 3.5
DCP-28 board
Hole
Coaxial cable
(black)
CN1
CN6
CN6
Shield plate