Yamaha CVP-25 - Handbuch (Seite 45)

impkmemtaóótt
*1. Channel pressure handled as vibrato.
*2. For bank selection transmission only the MSB changes.
The LSB is fixed at ООН,
*3.
*4.
Bank select reception.
The bank select MSB is used for melody voice and rhythm voice
switching.
The bank select LSB is ignored.
MSB ООН: GM melody voice.
MSB 7FH: GM rhythm voice.
The default for all the channels excepting channel 10 is ООН. Bank
select reception with channel 10 is not possible since channel 10
is assigned to the rhythm accompaniment. However, bank select
reception with channel 10 will be possible when you do the follow­
ing operation: turning the POWER back on while holding the C1
key down.
When the bank select MSB is 01H ... 7EH, all subsequent key-ons
received will be ignored.
No voice change will occur when only a bank select is received.
When a program change is received the latest bank select value is
used.
Portamento control is effective only when Reception is set in the
Multi mode,
RPN receives the following data:
Pitch bend sensitivity; BnH, 64H, ООН, 65H, ООН
Fine tuning:
Coarse tuning:
Null:
Default: 02H.0OH
BnH, 64H, 01H,65H, ООН
Default: 40H, ООН
BnH, 64H, 02H,65H, ООН
Default: 40H, ООН
BnH, 64H,7FH,65H, 7FH
*6. Reset all controllers.
Pitch bend, channel pressure, modulation, expression, sustain,
and sostenuto are returned to their default values.
All RPN data is set to NULL.
Portamento is reset.
*7. GM melody voices 0 through 127 become panel voices 1 through
128.
*8. Exclusive.
<GM1 System ON> FOH, 7EH, 7FH, 09H, 01H, F7H
All parameters except MIDI Master Tuning are reset to their
default values.
<MIDI Master Volume> FOH, 7FH, 7FH, 04H, 01H, II, mm, F7H
Allows the volume of all channels to be changed simultaneously
(universal system exclusive).
mm is used as the MIDI Master Volume value (II is ignored).
The default value for mm is 7FH.
This message is receive-only.
<MIDI Master Tuning>
FOH, 43H, InH, 27H, ЗОН, ООН, ООН, mm, II, cc, F7H
Allows the pitch of all channels to be changed simultaneously
(panel tuning).
mmll is used as the MIDI Master Tuning value, an the actual
tuning is shown by the expression:
T=Mx200/256-100
Where T is the actual tuning value in cents. M is decimal value
represented by 1-byte using bits 0...3 of mm as the MSB and
bits 0...3 of II as the LSB.
The default values of mm and II are 07H and OFH, respectively,
n and cc are also recognized.
This value is not reset by a GM System ON or Reset All Con­
trollers message.
This message is transmitted and received.
<Butk Dump>
bl and bh represent the total byte count as bl+bh*128.
CS: Checksum.
FOH, 43H, 76H, 18H, bl, bh, <Data>, cs, F7H Song memory;
<Panel Control>
Dual data change:
Dual ON/OFF:
Harmony/Effect;
DSP type:
Chord/Bass:
FOH, 43H, 76H, 19H, 04H, <Data>, F7H
FOH, 43H, 76H, 19H, 05H, <Data>, F7H
FOH, 43H, 76H, 19H, OEH, <Data>, F7H
FOH, 43H, 76H, 19H, OEH, ООН, 01H, <Da1a>, F7H
FOH. 43H, 76H, 19H, OBH, <Data>, F7H
*9. Internai/external clock selectable.