Please keep this manual, Important safety instructions – Yamaha CVP-25 Benutzerhandbuch

Seite 50

Achtung! Der Text in diesem Dokument wurde automatisch erkannt. Um das ursprüngliche Dokument anzeigen, können Sie den "ursprünglichen Modus" verwenden können.

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,

AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING-

When using any electrical or electronic prod­

uct, basic precautions should always be followed. These pre­

cautions include, but are not limited to, the following:

1*

Read all Safety Instructions, Installation Instructions,

Special Message Section items, and any Assembly Instructions

found in this manual BEFORE marking any connections, in­

cluding connection to the main supply.

Main Power Supply Verification: Yamaha products are

manufactured specifically for the supply voltage in the area

where they are to be sold. If you should move, or if any doubt

exists about the supply voltage in your area, please contact

your dealer for supply voltage verification and (if applicable)

instructions. The required supply voltage is printed on the

name plate. For name plate location, please refer to the graphic

found in the Special Message Section of this manual.

3» This product may be equipped with a polarized plug

(one blade wider than the other). If you are unable to insert the

plug into the outlet, turn the plug over and try again. If the

problem persists, contact an electrician to have the obsolete

outlet replaced. Do NOT defeat the safety purpose of the plug.

Some electronic products utilize external power sup­

plies or adapters. Do NOT connect this type of product to any

power supply or adapter other than one described in the owners

manual, on the name plate, or specifically recommended by

Yamaha.

WARNING: Do not place this product or any other

objects on the power cord or place it in a position where any­

one could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the

minimum wire size for a 25' cord (or less) is 18 AWG. NOTE:

The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electri­

cian.

O* Ventilation: Electronic products, unless specifically

designed for enclosed installations, should be placed in loca­

tions that do not interfere with proper ventilation. If instruc­

tions for enclosed installations are not provided, it must be

assumed that unobstructed ventilation is required.

7■ Temperature considerations: Electronic products should

be installed in locations that do not significantly contribute to

their operating temperature. Placement of this product close to

heat sources such as; radiators, heat registers and other devices

that produce heat should be avoided.

8

This product was NOT designed for use in wet/damp loca­

tions and should not be used near water or exposed to rain. Exam­

ples of wetydamp locations are; near a swimming pool, spa, tub,

sink, or wet basement.

This product should be used only with the components

supplied or; a cart, rack, or stand that is recommended by the

manufacturer. If a cart, rack, or stand is used, please observe all

safety markings and instructions that accompany the accessory

product.

10

.

The power supply cord (plug) should be disconnected from

the outlet when electronic products are to be left unused for ex­

tended periods of time. Cords should also be disconnected when

there is a high probability of lightening and/or electrical storm

activity.

11

.

Care should be taken that objects do not fall and liquids are

not spilled into the enclosure through any openings that may exist.

12

.

Electrical/electronic products should be serviced by a

qualified service person when:

a. The power supply cord has been damaged; or

b. Objects have fallen, been inserted, or liquids have been

spilled into the enclosure through openings; or

c. The product has been exposed to rain; or

d. The product does not operate, exhibits a marked change

in performance; or

e. The product has been dropped, or the enclosure of the

product has been damaged.

13.

Do not attempt to service this product beyond that de­

scribed in the user-maintenance instructions. All other servicing

should be referred to qualified service personnel.

14.

This product, either alone or in combination with an ampli­

fier and headphones or speaker/s, may be capable of producing

sound levels that could cause permanent hearing loss. DO NOT

operate for a long period of time at a high volume level or at a

level that is uncomfortable. If you experience any hearing loss or

ringing in the ears, you should consult an audiologist.

IMPORTANT; The louder the sound, the shorter the time period

before damage occurs.

15,

Some Yamaha products may have benches and/or accessory

mounting fixtures that are either supplied as a part of the product

or as optional accessories. Some of these items are designed to be

dealer assembled or installed Please make sure that benches are

stable and any optional fixtures (where applicable) are well se­

cured BEFORE using. Benches supplied by Yamaha are designed

for seating only. No other uses are recommended.

PLEASE KEEP THIS MANUAL

92-469-2

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: