Power-saving mode – Panasonic CF-VCD711 Benutzerhandbuch
Seite 9
Achtung! Der Text in diesem Dokument wurde automatisch erkannt. Um das ursprüngliche Dokument anzeigen, können Sie den "ursprünglichen Modus" verwenden können.
6
Follow the same steps to edit the "AUTOEXEC.BAT" file,
edit autoexec.bat C Enter)
7 Move the cursor to the line containing "MSCDEX.EXE" and delete the characters "rem"
at the beginning of the line. (Deleting "rem" causes the item to become valid.)
LOADHIGH C:\WINDOWS\COMMAND\MSCDEX.EXE /D:MSCD000 /L:L
(If this line is missing, add it.)
5 Press ( Alt) +CZD > thenCE) lo save the file. Then press C Alt) +CT), then [ X) to
exit the Edit program.
9
Restart the computer.
Power-saving mode
If the CD-ROM pack has not been accessed within 30 seconds, the drive motor will auto
matically shut down to reduce the power consumption. When the CD-ROM pack is ac
cessed once again, the power of the drive motor is turned on. However, approximately 30
seconds are required until data is actually read from the CD.
X
note
>
• IRemovable Disk (A:)] is displayed in [My Computer], but access is not possible. Se
lect [Cancel].
• If the vibration of the CD-ROM drive is excessive, set the [CD-ROM Drive Speed
(Max)] to [12x speed] in the Setup Utility.