Panasonic Superdisk Drive Pack CF-VFS712 - Handbuch (Seite 8)

Troubleshooting
The computer does not recognize the
Superdisk Drive Pack.
The access lamp ([^) does not light.
Cannot read data from the disk.
Cannot eject the disk.
Is the Superdisk Drive Pack properly mounted
in the multimedia pocket?
Is the disk set correctly ?
Is the disk bent, scratched, or dirty?
Remove the check mark from [Auto insert
notification] and [DMA] under [StartJ-
[Settings]-(Control Panel]-[System]-[Device
Manager]-[Disk drives]-[MATSHITA LS-
120 SLIM****]-[Settings]-[Options],
Is the computer powered on?
If not, power on and press the eject button.
<Use the following procedure if the previous method
failed.>
To remove a disk when the computer is powered off,
insert a sharp object such as a paper clip (made straight)
into the emergency hole. Pushing the object completely
to the end will enable the disk to be removed. However,
because there is the possibility that the lock mechanism
of the head carriage may not move, do not use this
method except for emergencies.
Emergency hole
Specifications
Item Description
Operating Voltage Range DC 5 V ±5%
Data Transfer Rate 531 to 958 KB/sec (120 MB mode)
221 (read), 74 (write) KB / sec (2HD mode)
111 (read), 37 (write) KB / sec (2DD mode)
Disk Rotation Rate 1440 rpm
Seek Time (Random seek) 65 ms (120 MB mode)
50 ms (2HD/2DD mode)
Interface Conforms to enhanced IDE (ATAPI) standard
Dimensions (width x depth x height) 133.1 mm X 147.1 mm x 15.3 mm
(5.24 "x5.79 "x0.60 "}
Weight Approx. 290 g [0.64 lb.}
Operating temperature / humidity range 5to35'’C (41 to 95 °F}*/30to 80% RH
(no condensation)
*15 minutes or more of consecutive disk access, using the SuperDisk Drive Pack be­
tween 30 and 35 °C, may damage the data on the disk.