Jconnecting/disconnecting the port replicator, Connecting the port replicator – Panasonic CF-VEB612A Benutzerhandbuch

Seite 6

Achtung! Der Text in diesem Dokument wurde automatisch erkannt. Um das ursprüngliche Dokument anzeigen, können Sie den "ursprünglichen Modus" verwenden können.

Advertising
background image

jConnecting/Disconnecting the Port Replicator

Before Connecting and Disconnecting the Port Replicator

Make sure to power off the computer.

♦CAUTION^

• The port replicator can only be used when the AC adapter is connected. It cannot be

used with the battery pack mounted on the computer as the only power source. (No
power is supplied in this case.) Note that if power is interrupted or if the AC adapter is
unplugged accidentally while the port replicator is in use, the power supply to the
computer will be cut off and data will be lost, regardless of the current suspend or

hibernation mode settings.

• Do not connect or disconnect the port replicator while the computer is powered on or in

the suspend or hibernation mode. Doing so could cause seriously damage your com­
puter.

Connecting the Port Replicator

Power off the computer.

Mr

DC-IN Connector

___ TOO

Connect the plug of the AC adapter (CF-AA159)
that came with the computer to the DC-IN jack of
the port replicator and plug the other end into an
AC outlet. (The AC adapter (CF-AA159) may also
be purchased as an optional part.)

♦CAUTIONS

• Do not use other than the specified AC adapter (CF-

AA159).

• Refer to the “Operating Instructions” that came with

the computer for information on proper handling of
the AC adapter and AC cord.

• Before unplugging the AC adapter, make sure to power

off the computer.

Advertising