Melissa HAIR BLOWER 635-101 - Handbuch (Seite 19)

18 18 19
Cord, plug and mains socket
• Check regularly that the cord and plug are not damaged
and do not use the travel hairdryer if it is, or if it has been
dropped or damaged in any other way.
• If the travel hairdryer, cord or plug is damaged, the
appliance must be inspected and, if necessary, repaired by
an authorised repair engineer, otherwise there is a risk of
electric shock. Never try to repair the appliance yourself.
• Remove the plug from the socket for cleaning.
• Avoid pulling the cord when removing the plug from the
socket. Instead, hold the plug.
• The cord must not be wound around the appliance.
When the product is used in a bathroom, unplug it after use •
since the proximity of water presents a hazard even when
the product is switched off
For additional protection, the installation of a residual
•
current device(RCD) having a rated residual operating
current not exceeding 30 mA is advisable in the electrical
circuit supplying the bathroom. Ask your installer for
advice.
KEY
1. On/off button
2. Foldable handle
3. Detachable air concentrator
4. Dual voltage 120/230 V
PRIOR TO FIRST USE
Check that you have removed all packaging from your travel
hairdryer.
The travel hairdryer is equipped with a dual voltage switch to
change between 120 and 230 V (4). The switch is located on
the back of the handle. Before using the hairdryer, check that it
is set to the correct voltage. You can switch between 120 and
230 V by turning the switch using an ordinary screwdriver.