Sanus Systems VMF308 - Handbuch (Seite 17)

6900-002066<02> 17
Wood Stud Wall Mounting – See Cautions in Step 3.
1. Locate studs. Verify the center of the stud with an awl or thin nail or
use an edge to edge stud fi nder.
2. Using the wall plate template [01], level the template [01] and mark
the hole locations.
3. Drill pilot holes as illustrated.
4. Place the wall plate against the wall. Tighten the lag bolts [32] only
until the washers [31] are pulled fi rmly against the wall plate [02].
2
1
41 cm (16 in.)
3
< 16 mm (5/8 in.)
13mm (1/2 in.) 5.5mm (7/32 in .)
10mm (3/8 in. 1
3
2
13mm (1/2 in.)
VMF308 Wall Plate Template
(6700-002536 <01>)
Wood Stud
Solid Concrete or Concrete Block
Customer S ervice Americas: 800-359-5520 • 651-484-7988 • inf
o@sanus .com
Europe, M iddle East, and A frica: + 31 40 2324700 • eur
ope.sanus@milest one.com
Asia Pacific: 86 755 8996 9226 • sanus
.ap@milest one.com
4
4
2
4
3-1
1
3
13mm
(1/2 in.)
5.5mm
(7/32 in .)
41 cm
(16 in.)
< 16 mm
(5/8 in.)
[01]
[02]
[31]
[32]
75 mm
3 in.