Snom 360 - Handbuch (Seite 11)

snom technology AG • 11
2
English
Connecting the
phone
First connect one end of the handset cable to the handset and
then to the jack labeled “
” on the left-hand side of the phone’s
bottom.
Next plug the Ethernet (network) cable into the RJ45 connector
labeled “
”, and plug the other end into the network side to
establish a data link. The second RJ45 connector, labeled “ ”, is
for daisy-chaining further Ethernet devices without the need for a
second Ethernet connection line.
If you are using an external power supply, please insert the plug of
the power supply into the connector labeled “
” next to the data
line and hook up the casing into the mains.
If you want to use a headset, it can be connected to the audio jack
labeled “
” on the bottom side of the snom 360.
Clip the cords into the appropriate slots on the footstand or, in the
case of the handset cord, on the bottom shell of the phone (see
Fig. 1 in the chap. Setting up the phone).