Technical data, Items supplied, Description of the appliance – Kompernass KH 4406 Benutzerhandbuch

Seite 5: Assembly, Putting into operation, Operation

Advertising
background image

- 3 -

• NEVER use the shredder for tasks for which it

was not designed.

• Always be attentive! Always pay attention to

what you are doing and act

with common sense.

Never use the appliance when you are distracted
or don’t feel well.

Technical Data

Mains voltage:

220-240 V ~ 50Hz

Rated current :

1,5 A

Protection class:

II

CO Time:

15 minutes

Cutting process:

Cross-cut, 4x41 mm-Particles

Working width:

240 mm

Slit depth corresponds to DIN EN 294

CO Time
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. After the prescribed
C.O. time the appliance must be switched off for as
long as is necessary for the motor to cool down.

Items supplied

Paper shredder KH 4406
4 Rollers
4 Retaining caps
Instructions for use

Description of the appliance

q

Cutter attachment

w

Switch

e

Cutter opening

r

Viewing window

t

Waste receptacle

y

Rollers

u

Roller container

Assembly

• Insert the dowels on the rollers

y

into the openings

on the underside of the roller container

u

.

• Push the retaining caps over the dowels from inside

to prevent them slipping back out.

Putting into operation

• First of all, place the cutter attachment

q

onto

the roller container

u

so that the power cable

is located at the rear, i.e. on the closed side.

• Push the waste receptacle

t

into the roller con-

tainer

u

.

• Connect the paper shredder to a power socket.

Operation

Switching the appliance on:
• Place the switch

w

to the position

for shredding.

When the appliance is ready, the green LED glows.

Note:

The Paper Shredder is fitted with a safety stop: If the
waste receptacle

t

is not inserted, or is not correctly

inserted, the paper shredder will not start. In this
case, locate the waste receptacle

t

correctly.

When the green LED glows you can operate the
Paper Shredder as usual.

Inserting paper:
• Insert paper from above and in portrait format

into the cutter opening

e

.

The motor starts automatically and switches itself
off automatically if no further paper is inserted.
You can shred up to 15 sheets (80g/m

2

-Paper)

at the same time.

IB_KH4406_E4114_LB3 28.03.2008 14:17 Uhr Seite 3

Advertising