Parkside PSS 250 A1 - Handbuch (Seite 5)

6 GB/IE
Introduction
Orbital sander PSS 250 A1
© Introduction
Before using the appliance for the first time
familiarize yourself with all functions of
the appliance and inform yourself about
the correct handling of electrical tools. Please read
the following operating instructions carefully. Retain
these instructions for future reference. Additionally,
pass them on to whoever might acquire the appli-
ance at a future date.
© Intended use
The oscillating sander is suited for dry sanding of
wood, plastics and paints. Any other use or modifi-
cation is considered improper use and involves sig-
nificant accident risks. The manufacturer declines to
accept responsibility for damage(s) arising out of
usage contrary to the instructions specified below.
The appliance is not meant for commercial use.
© Features
1 ON / OFF switch
2 Locking button for the ON / OFF switch
3 Release button
4 Dust collection box
5 Connection (vacuum dust extraction)
6 Clamping bars
7 Tensioning lever
8 Sanding plate
9 Sanding Pad
10 Oscillation speed selection
11 Grip surface
12 Reducer
© Delivery contents
1 Orbital sander PSS 250 A1
1 Sanding sheet (Grit 120), see Fig. F
1 Dust collection box
1 Reducer, see Fig. D
1 Operating manual
The following pictograms are used in these operating instructions / on the device:
Read instruction manual! W Watts (Effective power)
Observe caution and safety notes!
Wear hearing protection, dust protection
mask, protective glasses and protective
gloves.
Caution – electric shock!
Danger to life!
Safety class II
Risk of explosion!
Keep children away from electrical
power tools!
Risk of fire!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
n
0
No load speed Dust hazard!
V~
Volt (AC)
Dispose packaging and appliance in
an environmentally-friendly way!