Philips HB555 - Handbuch (Seite 16)

16
Do not use abrasives or scourers.
Never use liquids such as alcohol, methylated spirits, petrol or acetone
to clean the protective plate as this may cause irreparable damage.
Replacing the tube lamps and/or starters
In the course of time (in normal family use after some years) the
efficiency of the tube lamps will gradually decrease.
If this happens, you may increase the tanning session time or have the
tube lamps replaced.
◗ You can have the tube lamps and/or the starters replaced by
authorized service personnel: they have the required skill and the
original replacement parts and tools to do the job.
They also have the facilities to dispose of the used tube lamps.
◗ If you prefer to replace the lamps yourself, proceed as follows:
1 First remove the mains plug from the wall socket.
C
2 Remove the decorative cap, loosen the screws and remove the
two end caps.
C
3 Pull out the protective shield completely.
After this, the lamps and starters are accessible.
4 Rotate the lamps slightly to the left or to the right.
5 When unlocked remove them from the lamp holders.
6 Remove the starters by turning slightly to the left and
withdrawing.
(Half the amount of starters are at each end of the solarium HB556
only at the foot)
7 To place new lamps and starters proceed in reverse order and
direction.
8 Slide the protective shield back into the profile.
Do not forget to fix the end caps by means of the screws.
B Type HB 556 only:The lamp of the facial tanner may only be replaced
by authorised Philips Service personnel.
The tube lamps of solariums contain substances which may pollute the
environment. When discarding old tube lamps, please ensure that they
are separated from the normal household refuse and that they are
disposed of at an officially assigned place.
ENGLISH
1
2