Peerless Industries PARAMOUNT PP740 - Handbuch (Seite 10)

10 of 20 ISSUED: 02-05-09 SHEET #: 202-9312-1
P
A
ARM TENSION ADJUSTMENT: If more or less tension is desired in the arm pivot points, do the following:
• To increase tension, turn tension screw(s) clockwise with allen wrench.
• To reduce tension, turn tension screw(s) counter-clockwise with allen wrench.
NOTE: Do not turn more than half a turn.
TENSION
SCREWS
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen
to fall.
WARNING
CORD MANAGEMENT: Tighten cable to top of wall
mount assembly arm (A) using cable tie (P).
Cord Management and Arm Tension Adjustment
CORD
5