Philips gc4310 Benutzerhandbuch
Seite 6
Silk, woollen and synthetic materials: iron the reverse side of the fabric
to prevent shiny patches. Avoid using the spray function to prevent
stains.
Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.
4
Put the mains plug in an earthed wall socket.
C
5
When the amber temperature pilot light has gone out, wait a
while before you start ironing.
The amber pilot light will go on from time to time during ironing.
Using the appliance
Steam ironing
1
Make sure that there is enough water in the water tank.
2
Select the recommended ironing temperature (see chapter
'Preparing for use', section 'Setting the temperature').
C
3
Select the appropriate steam setting. Make sure that the steam
setting you select is suitable for the ironing temperature
selected:
- 1 - 3 for moderate steam (temperature settings
2 to 3)
- 4 - 6 for maximum steam (temperature settings
3 to MAX)
B
The iron will start steaming as soon as the set temperature has been
reached.
Ironing without steam
C
1
Set the steam control to position O (= no steam).
2
Select the recommended ironing temperature (see chapter
'Preparing for use', section 'Setting the temperature').
Features
Spray function
You can use the spray function to remove stubborn creases at any
temperature.
1
Make sure that there is enough water in the water tank.
ENGLISH
6