NEC LCD300 - Handbuch (Seite 10)

Recommended Use
For optimum performance, please note the following when setting up
and using the MultiSync LCD
300 color monitor:
•
The optimum monitor position is facing away from direct
sunlight.
•
Allow adequate ventilation around the monitor so that heat
can properly dissipate.
•
Do not place any heavy objects on the power cord. Damage
to the cord may cause shock or fire.
•
Use the monitor in a clean and dry area.
•
Handle with care when transporting. Save packaging for
transporting.
•
When operating the MultiSync LCD 300 with its AC125-
240V worldwide power supply, use a power supply cord
that matches the power supply voltage of the AC power
outlet being used. The power supply cord you use shall be
employed one of the type H05VV-F with the earth pin,
which must have been approved by and comply with the
safety standards of your country.
•
The power cable connector is the primary means of detaching
the system from the power supply. The monitor should be in-
stalled close to a power outlet which is easily accessible.
•
Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution, glass cleaner or tissue
paper.
•
For optimum performance, allow 20 minutes for warm-up.
•
Avoid displaying fixed patterns on the monitor for extremely
long periods of the time to avoid after-image effects.
•
Avoid applying pressure to the LCD monitor surface.
Recommended Use E - 5