Revox Re:sound L 120 - Handbuch (Seite 13)

120 Re:sound L
12
Power Handling Capacity
The power handling capacity
stated on the type plate of your
Revox loudspeakers refers to
an amplifier with tone control
set to linear. lt is possible to use
these loudspeakers with
amplifiers rated for a higher
power output.
However, ensure that the
volume is only increased until
your ear - in most cases reliably
-detects an overload. First signs
of overload are a heavy
increase in distortions.
Your Revox loudspeakers will
not be damaged by a short-time
overload.
Damage of Ioudspeaker drivers
due to overload can easily be
determined by the service
personnel. In such cases, you
are not entitled to any warranty
work.
Using spikes
The Re:sound L120 is fitted with
spikes during manufacture. The
spikes serve to decouple the
speaker from the floor it is
placed on. For this purpose, the
4 spikes are screwed into the
threaded sockets on the base of
the speaker. The last few
millimetres of the thread should
be used for ensuring that the
speaker is level, so that the
weight of the speaker is
distributed evenly over all four
spikes.
Use the supplied spike cups,
with felt disc under the spikes,
to avoid scratching the floor.
En
g
li
sh